Programming the Yaesu FT1D via Keyboard

1. Power the radio on.

2. Switch to VFO mode (Press the “V/M” key)

3. Enter the Frequency (i.e. 146.520) Shift Direction is automatic

4. Set PL Tone:
       a. Press & hold “Set/Disp” for 1 second
       b. Select menu #4 “Signaling” then press the “Ent” button
       c. Select menu #12 “Tone Sql Freq” then press the “Ent” button
       d. Choose the needed PL Tone Frequency by turning the knob
       e. Once PL Tone is selected press “Set/Disp” rapidly three times

5. To enter into memory:
       a. Press and hold the “F” (Function button) for about 1 second
       b. Turn knob to find desired space to enter your new frequency
       c. If memory slot is already used you will see “Overwrite?” to overwrite press the “F” button

6. To Write Alpha Tag
       a. Go back in to memory mode
       b. Press “Set/Disp” button for about 1 second
       c. Select menu #3 “Memory” then press the “Ent” button
       d. Select menu #3 “Memory Name” then press the “Ent” button
       e. Enter your alpha numeric character with either the key pad or by using the knob.

Be the first to comment on "Programming the Yaesu FT1D via Keyboard"

Leave a comment