Programming the Yaesu FT1D via Keyboard
1. Power the radio on. 2. Switch to VFO mode (Press the “V/M” key) 3. Enter the Frequency (i.e. 146.520) Shift Direction is automatic 4. Set PL Tone: a. Press & hold “Set/Disp” for 1…
Read More1. Power the radio on. 2. Switch to VFO mode (Press the “V/M” key) 3. Enter the Frequency (i.e. 146.520) Shift Direction is automatic 4. Set PL Tone: a. Press & hold “Set/Disp” for 1…
Read MoreWhen the radio is first turned on fresh out of the box or after getting a factory reset, it starts a setup wizard: 1. Initial prompt is your YSF callsign that other HAMs will see…
We will assume that you are familiar with the Keys and Functions. Enter VFO mode Select A or B to program in Select the correct BAND Enter the frequency you want to try <Menu> <13> …
HD1 is true-2-slot Dual Band Digital Radio, compliant with MOTOTRBO Tier Ⅰ&Ⅱ. The HD1 can operate many functions through the radio panel. Many hams are very interested in it and want to know how to upgrade HD1…
The Ailunce HD1 (GPS) is a dual band FM / DMR handheld radio with 10W / 5W / 1W power. The device can store up to 3000 channels. The special feature of this device is…
You CAN change the volume on the FT-1D with one hand if you perform the following. 1. Go to setup (hold in DISP button) 2. TX/RX (ENT) 3. Audio (ENT) 4. Volume Mode (ENT) 5….